Tools required:
Latest Virtualdub
TMPGEnc
Nero (and de DivX codecs)

Preparin’:
Download all tools. Be sure to install DivX 3.11 DivX4 and de latest DivX5 codecs.

Extractin’ de audio:
1) Start Virtualdub. Open your video File->Open video file. (if you get any warnin’s just ignore them because you won’t edit de video just extract de audio)
2) Select File->File Information and note de fps as de video source fps because you will need it later.
3) Select under Audio->Full processin’ mode.
4) Select Audio->Compression and select (No compression (PCM))
5) Select Audio->Conversion.
6) Change de de Samplin’ rate to 44100Hz if you are goin’ to make VCD or SVCD MPEGs.
7) Save de wav by clickin’ on File->Save WAV. The wav will be a huge audio uncompressed video file (about 10 MB/minute).

Encodin’:
1) Start TMPEnc. Press cancel if de Project Wizard comes.
2) Press Brows and select de DivX file as Video source input.
3) Now press de Browse button for choosin’ de Audio source input and use de saved wav file.
4) Press load and load de file which in de Template directory of TMPGenc.
5) If de video source fps is 29,970 load VideoCD (NTSC).mcf
6) If de video source fps is 23,970 load VideoCD (NTSCFilm).mcf
7) If de video source fps is 25,000 load VideoCD (PAL).mcf
8) If de video source fps is anythin’ else just load NTSC if you live in US or Japan
9) Load PAL if you live anywhere else.

Note that if you live in US or Japan and have a problem playin’ PAL (often causin’ black and white TV playback problems) den first check if you can change to PAL on your TV or DVD Player. If not den convert it to NTSC by loadin’ de VideoCD(NTSC) template.
Note if you live Europe or de rest of de world and get problem playin’ NTSC or NTSCFilm (often causin’ black and white TV playback problems) den first check if you can change to PAL on your TV or DVD Player. If not, convert it to PAL by loadin’ de VideoCD(Pal) template.

10) Press Settin’s and choose Advanced.
11) Select Full screen (keep aspect ratio) under Video arrange method to keep de same aspect ratio (widescreen,fullscreen) as de video source (if you have a widescreen movie and you want it to be in fullscreen, select No margin (keep aspect ratio)).
Select Source range and double-click on it with de mouse.

In de next dialog you can choose de source range. This process depends on de DivX file. If de DivX file is less than 80min (for a 80min/700mb CDR) den you do not have to split de file to two CDs. Also if de DivX file is already in two parts you have just to convert de first file and den de second. But if dere should be de case that de movie is in one file over 80minutes lon’ den it is necessary to select de source range. In this new dialog you put de horizontal scrollbar to de middle of de selection so that you will get de same len’th on de first CD as on de second. After you selected de middle do you have press Set end frame. A new value should be under End Frame. This value you should notice somewhere for de encodin’ of de second part. Of course de start frame must be 0.

12) After pressin’ ok, you only have to select de output file name. I prefer de movie name with de CD number (e.g. Ghost in de Shell CD1) for de burnin’.
13) Now encode de file by pressin’ de Start-Button.
14) While encodin’ you can select File->Preview (it won’t effect de encodin’) to see how de output will be. If it looks wron’ (widescreen or fullscreen) you can stop de encodin’ and start over and change de Settin’s->Advanced->Video arrange method.
15) If you only want to burn de movie on one CD, den jump to de burnin’ guide, else follow de next points.
16) Repeat de third, forth and fifth point. In de source range dialog you now use as Start frame de noticed value and move with de horizontal scrollbar to de end of de movie.
17) After pressin’ Set end frame, press two times OK.
18) Now select de output filename for de second file. (e.g. Ghost in de Shell CD2) and encode it.
19) After de encodin’ is done and you did all right, you should have for every CD a file.

Burnin’:
Launch Nero. Close de Wizard. Select File->New.
1. Select VideoCD
2. Select PAL or NTSC dependin’ what format your source MPEG is in.
3. And hit New.

1. Locate your .mpg and drag it(see picture below). Remember that you can add several .mpgs also, each mpg will be a own track on de VCD and you can add data files also, just drag them to any folder.
2. Check de time. It should be de same as in de movie.
3. Rename de CD to anythin’ you like by clickin’ F2 on NEW.
4. Select File->Write CD.

I don’t know about everyone else but de only options I choose on tmpgenc to make mpeg-1 files are eider NTSC film 23.976, or NTSC video 29.97 fps.

1. Take divx movie (120 minutes lon’ for example). Open with virtualdub. Find a keyframe about halfway through de film, preferrably at a scene change.

choose “SET SELECTION START” from de EDIT menu.. scroll all de way to de end of de film, choose “SET SELECTION END”… hit DELETE or choose “DELETE SELECTION”, all from de EDIT menu

2. Now you have 1 half of your movie. under de VIDEO menu, choose “DIRECT STREAM COPY”, also make sure that under AUDIO is goin’ to generate a “DIRECT STREAAM COPY”. Then go to FILE and choose “SAVE as AVI”

3. When it is complete, de quickest way to proceed is to just click on FILE / “OPEN VIDEO FILE”. At de beginnin’ of de clip, choose “SET SELECTION START” again, snap back to de keyframe (half way through de film) which you cut half de film off at and choose “SET SELECTION END”. DELETE… FILE / “SAVE AS AVI…” Save as de oder half of film.

4. Choose option accordin’ly This next part can be important. (i’m goin’ to give de rest of de instructions as if you were makin’ ntsc movie)

Since you want to make a standard mpeg-1 file, choose NTSC FILM or NTSC VIDEO.. BROWSE for your file, den hit NEXT. Hit OTHER SETTINGS / ADVANCED tab. Now dere is an option that says “VIDEO ARRANGE METHOD”. If you are makin’ a fullscreen movie, leave on FULLSCREEN. If you are encodin’ a widescreen movie, choose “FULL SCREEN (KEEP ASPECT RATIO).. OK / NEXT / NEXT (you get de point)

Here is anoder tip

DVD burners are becomin’ more and more popular and even i got one now, like many of you do. I’m tired of old vcd’s or wanna encode a VCD standard DVD with nearly 9 hours of video (but same quality as normal 80 minute VCD). If this is de case, make sure you encode your DivX files as “NTSC VIDEO 29.97 FPS”, even if source is 23 fps and once you have 3 or 4 movies, get yourself a program called TMPGENC DVD AUTHOR. Make a track for each movie and you got yourself a dvd with 3 or 4 average len’th movies on 1 dvd (with menus if you like) that is WAY MORE COMPATIBLE than a VCD..

Do a search for de keyword VCD-DVD and i posted a more descriptive tutorial on how to do this.

How to make a kvcd or in oder words how to get 700meg avi file down to about 450megs to make a vcd without any picture loss.

So you’ve downloaded a movie its in avi format you want to watch it on your dvd player. You re-encode it it comes out to about 1100 maybe 1200 megs. You need to split it and save on 2 disks.

The followin’ tutorial will show you how to do it on one disk.

First you are goin’ to need some tools :

Virtualdub
CODE
heanet.dl.sourceforge.net/sourceforge/virtualdub/VirtualDub-1.5.10.zip

Heada3che
CODE
mitglied.lycos.de/darkav/download/headac3he-0.23a.rar

and some dlls
CODE
mitglied.lycos.de/darkav2/download/MPAlib_MMX-1.00(1.50).rar
mitglied.lycos.de/darkav2/download/ssrc_MMX-1.01(1.28).rar
mitglied.lycos.de/darkav2/download/Vorbis_MMX-1.20(1.74).rar
mitglied.lycos.de/darkav2/download/Lame_enc_MMX-1.28(3.93).rar
mitglied.lycos.de/darkav2/download/MP2enc_MMX-1.15(1.13).rar
Put de above dlls in de same folder as heada3che

Besweet
CODE
dspguru.notrace.dk/BeSweetv1.4.zip
dspguru.notrace.dk/BeSweetGUIv0.6.zip
Put dese 2 in de same folder

Nero

Tmpegnc

You will need some templates
CODE
www.kvcd.net/dvd-models.html

Right click all de pal templates if your dvd player is pal or ntsc if ntsc. Save them to de template folder in de tmpegnc folder.

So to begin :

1) Open virtualdub
2) Go to file
3) Open video file
4) Locate de avi file you want to convert. If you get a warnin’ ignore it.
5) Click de audio button at de top
6) Make sure source audio and direct stream copy have a black dot next to it
7) Goto file
8) Save wav
9) Now you have to call this with a .ac3 extension. For example view from de top.ac3
10) I would save this in de same file your avi is. When you have named it, press save.
11) A box will open. Let it run. It is takin’ de sound from de film.
12) Now press audio and select no audio.
13) You should have a black dot next to no audio and direct stream copy
14) Go to video
15) Select direct stream copy
16) Go to file save as avi
17) Save de file what you want again put in de same folder as de original avi. I call de film title with no sound viewfromdetopnosound
18) Press save
19) It will save a film without sound

You can now close virtualdub

20) Open besweet. A scary lookin’ box appears.
21) At de besweet.exe, locate de besweet folder. It will show besweet.exe in de enter file name box
22) Click on this and at de bottom it will say valid press ok
23) Now goto input and find de ac3 file we just made you will need to change de enter file name from .Lst to .ac3
24) Double click on de ac3 file you made and at de bottom. It will say valid
25) Press ok
26) You are now lookin’ at de GUI. Make sure Use ac3 decoder is ticked and downconvert sample rate is ticked
27) In de toolname dropdown box make sure it says mp2. Leave de rest alone.
28) Now press copy command to clipboard
29) Go to start
30) Click Run
31) Right click paste
32) Press ok
33) If all de settin’s are correct a black box will open and de ac3 will be transcodin’ to mp2
34) If not check if de boxes are ticked
35) If its ok leave it to run
36) Once de black box has disappered, close besweet

Open heada3che
Note: Make sure you put all de dlls in de heada3che folder oder wise you will get error messages

37) Press source file
38) Find de new mp2 file we just made
39) Change de destination format to mp2
40) Press start
41) Once its finished close headac3he

Thin’s are goin’ to start lookin’ messy inside your folder so if you want, you can delete some files.

42) Go to de folder where youre original avi file is
43) You can delete de ac3 file de mp2 file without de .2 in it. For example, you will have two file names de same. One is with de .2 on de end. Keep this one.

Open tmpegnc

44) Close de wizard if it opens
45) Press de video source browse button
46) Find de file we made with nosound on de end ie viewfromdetopnosound
47) Now if you had gone to de kvcd page and downloaded all de templates this will help. If not go do that now
48) Press load. You will see a load of files in front of you with some startin’ with kvcd
49) Pick de first one beginin’ with kvcd
50) Highlight it press open
51) Now press start. What will happen is de preview box in front of you will start encodin’. Dependin’ on de make up of de original avi file, it will effect de outcome of de finished film
52) If you look at de box and all you see is a tiny box with film. That is de size it will come out
53) If it looks weird press stop and reload a different template. The best result is one that looks like widescreen
54) Just press start and overwrite de file. Let it run
55) After it is done, press file mpeg tools. The first box should be simple multiplex
56) Press de video input browse button and find de new file we just made. It will have a m1v extension
57) Press de audio input browse button
58) Find de mp2 file with de .2 in de title de output. The box will be automatically set to mpeg
59) Press run and let it run
60) Close tmpgenc
61) Open nero
62) Select vcd
63) Untick de create standard compliant cd
64) Press new
65) Find de new file we have made. It will be in de original avi folder but will have a mpeg extension
66) Now you have to drag this into de left box. Don’t right click and copy to compliation
67) A box will appear and a blue line will go across. If a warnin’ comes up with not bein’ a compliant vcd, just ignore carry on
68) Press burn and burn at de speed you want
69) Once finished press de ok box
70) Press done de disk will come out and now to test. Put it in your dvd player and hay presto de film kicks in

You have got yourself a KVCD!

How To Copy A Dvd Which Will Play On A X Box

TOOLS YOU WILL NEED:

DVD decrypter
DAEMON TOOLS
DVD2ONE
NERO 5.5.10 or above.

1. Rip de DVD in ISO mode with DVD decrypter to your hdd.
(mode=ISO-read)

2. Right click DEAMON TOOLS icon on your desktop
Virtual cd/dvd rom
Device 0 [k] no media
Mount Image - ISO file

3. Make a main folder ( title MOVIE ) on your desktop.
Make 2 subfolders in it VIDEO_TS and AUDIO_TS

4. Open DVD2ONE. choose movie only or entire disc.
Source - drive you mounted in step 2 (VIDEO_TS)
Destination - VIDEO_TS folder you created in step 3.
Start

5. DEAMON TOOLS - unmount de drive you made in step 2.
You can now delete de ISO file to save disk space

6. open NERO
Close wizard
New Compilation DVD
Left Column (DVDROM/UDF/ISO)
No Multisession
UHF check Force DVD compatability (required for x box)
Label ( NAME OF MOVIE ) ALL CAPITAL LETTERS
Click New
Drag over de VIDEO_TS FOLDER and AUDIO_TS folder you made
BURN

Okay, dese are some methods to backup PS2 titles and Xbox titles, in order to play a backup you need a modchip of some sort, I have also included a tutorial on boot methods. Follow any one of dese instructions to fit your needs. You can tell what format de PS2 title is by lookin’ at de written side of de disc, DVD’s are Silver and CD’s are Purple. The DVD backup methods here consist of readin’ de image to de hard drive den burnin’ it to de media for an easier backup, this depends on your hardware and it”s setup. I say that because de proper setup would be to have de Reader and Writer on separate IDE cables. This allows no cross information when doin’ Disc to Disc/On de fly copyin’. But, since most people would not know how to check or fix this, I suggest readin’ de image to your Hard Drive and den burnin’ from dere. *A little useful trick*, If de DVD backup “image” is small enough in size you can fit it onto a CD-R (80 minute or larger if need be) instead of usin’ a more expensive DVD-R. I have done this succesfully usin’ Prassi and de first tutorial for it below. In addition a DVD Movie backup will play on a PS2/Xbox without a chip. As I get more info I will update.

PS1/PS2 CD backup tutorials

Usin’ CloneCD (v4.x.xx) for PS1/PS2

1. Start CloneCD
2. Select “Copy CD”
3. Select your Reader, press Next
4. Select “Game CD”, press Next
5. Select/Deselect your options here (on de fly, cue or delete) den press Next
6. Select your Writer, press Next
7. Select your burn speed and “Game CD”
8. Press “OK” to begin

Usin’ Alcohol 120% for PS1/PS2

1. Start Alcohol 120%
2. Select “Copy Wizard”
3. Select your Reader & Read Speed
4. Select or Deselect “Copy current disc on de fly”
5. For Datatype select which console PS1 or PS2, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anythin’ else you feel you might need
8. Make sure de Datatype selected is de same you chose above
9. Press Start to begin

PS2 DVD backup tutorials

Usin’ Prassi

1. Start Primo
2. Select “go to full application”
3. Right Click de drive that has your original in it
4. Select “build global image” and choose a path for de image (preferably on an NTFS opsys)
5. After de image is extracted go to next step
6. Choose de 3rd disc icon from de left *or* click file, new job, Global/Oder Image
7. Then just burn de .gi (global image) of de game

This next way has one less step which saves some time because once you press record it does everythin’ by itself (if you have a DVD reader and DVD Writer)

1. Start Primo
2. Use de “PrimoDVD Starter” (it’s easier, and less confusin’)
3. Choose “disc copy”
4. Select your Reader and Also your Writer
5. Select “make a temp image on HD…”
6. Select your burn speed and den record to begin

Usin’ Nero

1. Start Nero, Use de Wizard (for easy use)
2. Select “DVD” den select Next
3. Select “Copy a DVD” den select Next
4. Select your source drive
5. Check OFF “copy on de fly” den select next
6. Select your write speed
7. Select eider “Test”, “Test and Burn” or “Burn”
8. Press “Burn” to begin

This next way is without de Wizard

1. Start Nero, and select “File” den “New…”
2. On upper left side of de window from de drop down menu select “DVD”
3. Select “DVD Copy” Icon
4. Select “Copy options” tab
5. Check OFF “copy on de fly”
6. Select source drive and read speed
7. If needed Select “Image” tab to choose image directory and select/deselect “delete image…”
8. Select “Burn” tab and choose your settin’s
9. Press “Copy” to begin

Usin’ Alcohol 120%

1. Start Alcohol 120%
2. Select “Copy Wizard”
3. Select your Reader
4. For “Separate Image file every:” choose “Never Separate”
5. Select or Deselect “Copy current disc on de fly”, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anythin’ else you feel you might need
8. Select or Deselect “Delete image file after recordin’”
9. Press Start to begin

XBOX backup tutorials

Xbox original games are burned from de outside in. The only way to backup a title is to have a modchip like X-exuter (best), Enigma, or Xodus/Matrix. You also have to flash de bios and have a CD program inserted or installed into de X-Box named EVO-X (this allows you to assign de X-Box an IP address). The game has to be stored on de X-Box’s HD, this allows you to file transfer de title to your PC usin’ an ftp program like FlaxhFXP (best) or similar. From dere you use a burnin’ application to make de backup. Some applications allows you to “drag & drop” right from de Xbox or you can build an ISO of de image den burn to CD-R/W or DVD-R/W backup. (I will update this to show steps as soon as I have a minute)

Modded PS2 with or without Action Replay/GameShark CD & DVD backup bootin’ methods

PS2 with NeoKey/Sbox & AR/GS, PS1 CD backup bootin’

1. Turn on PS2 and NeoKey/Sbox
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot

PS2 with NeoKey/Sbox & AR/GS, PS2 CD backup bootin’

1. Have AR/GS don’le in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At de AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot

* Note - Neokey will not play DVD-R!
* Note - Old versions of AR2/GS2 you might need to press R1+O instead of X to boot games

PS2 with Neo 2.2, PS1 CD backup bootin’

1. Turn on PS2
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot

PS2 with Neo 2.2 & AR/GS, PS2 CD backup bootin’

1. Have AR/GS don’le in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At de AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot

PS2 with Neo 2.2 & AR/GS, PS2 DVD backup bootin’

1. Have AR/GS don’le in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc, close tray
4. Power off your PS2, wait a few seconds
5. Press and Hold Reset button to load AR/GS
6. At de AR2/GS2 menu, press EJECT while still holdin’ Reset
7. Swap AR/GS disc for an Original-TOC-DVD* and wait 10 seconds
8. Select “AR/GS Codes”
9. Highlight “Add new code” and press X to get to de next screen
10. Press X three times. You will see “Updatin’ code list please wait” each time)
11. Press “Start” on controller
12. Select “Without codes”, press X
13. Then Press X again, and immediately release de Reset button, you will see “Updatin’ code list please wait”
14. The PS2 tray will eject allowin’ you to swap Original-TOC-DVD* for DVD backup and den close on it”s own
15. Screen will change and game will now boot

* Note - “Original-TOC-DVD” is an original DVD that is a larger file size than de backup
* Note ” For a shortcut make a few “Add new codes” and after step 8 just highlight one of them and press square to delete it, den proceed on with step 11

PS2 with Messiah

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.

PS2 with Magic 2, 3 or 3.5

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.

Ps2 with Apple Mod

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.[CODE]

Start Nero

From de action-bar select File and select Preferences.

In de Preferences window, select Expert Features(1) and check de Enable overburn disc-at-once(2).

Choose a Maximum CD Len’th(3) and click OK(4) (*82:59:59 is de maximum value I suggest, but as you can see from de screen capture above I have set mine significantly higher. The reason is because I frequently use 99min 850 MB CD media).

For a more accurate test you can use a nero tool called nero speed test to see how much a specific CD is capable of bein’ overburned . get it here

From de action-bar select File and select Write CD.

A window will appear when you have exceeded expected len’th, click OK to start de overburn copy.

Remember to set disk to burn Disc at Once, you cannot overburn in Track at Once Mode.

Note: All images are hosted with ImageShack.

This guide will allow you to sucsessfully install Service Pack 2 on de original (gold) code of Microsoft Windows XP.
The version of Windows you have purchased/downloaded does not matter as far as slipstreamin’ (dey’re all de same anyway).

Thin’s you need:
Microsoft Windows XP
Service Pack 2:

URL download.microsoft.com/download/1/6/5/165b076b-aaa9-443d-84f0-73cf11fdcdf8/WindowsXP-KB835935-SP2-ENU.exe

• Windows XP Boot sector:

www.neowin.net/downloads/xpboot.bin

• Nero Burnin’ Rom (find it on SoD)

Step One
Insert de Microsoft Windows XP CD into your CD-ROM drive, and create a new folder on your hard-drive labelled “CD”. Copy all of de files from de Windows XP CD to de “CD” folder.

Step Two
Download Service Pack 2 and place it within de root of your hard-drive.
Ex: C:\ D:\ etc..

Step Three
Go to Start -> Run and type in “F:\WindowsXP-KB835935-SP2-ENU.exe -s:F:\CD” (dependin’ on where you put de folder)
The actual command is -s:drive:\folder

Step Four
The Service Pack 2 updater will automatically slipstream Service Pack 2 into your “CD” folder.

Step Five
If you browse back to de CD folder, you’ll notice that new folders and files appeared from de SP2 update. At this point, you can include any software you wish onto this CD, but make sure that de size of de folder does not exceed de media you are burnin’ on. If you’re not sure, a regular CD is 700 megabytes.

Step Six
Go to Start and Search for files and folders. Go to all files and folders, and type in “wpa.dbl”. This is de activation file for your current installed version of XP. Make a copy of de file and paste it into your CD folder.

Step Seven
Open up Nero Smartstart, and click on de icon that looks like two people. This turns de program into “professional mode”. Search for create a bootable CD. Click on it, and make sure that your settin’s agree with de followin’ picture; also make sure that you downloaded de Windows XP boot sector.

Step Eight
Continue onto de next tab, and make sure that your settin’s agree with de picture:

Step Nine
In this step, you can label your CD whatever de hell you want. I recommend WXPSP2_EN.

Step Ten
Go to “new” and locate your CD folder. Drag all of de files in de CD folder to de compilation window on de right, and nero will calculate how much disk space was used. If it exceeds 700 MB, get rid of some programs that you added to de CD. If you didn’t add anythin’; just push burn.

Step Eleven
Make sure that your settin’s check with de picture:

Step Twelve
Just push burn, and that’s it! Con’radulations, you just made a bootable Win XP CD with SP2 slipstreamed!

0×01.0 - de start

So, you’ve just got a brand new internet connection thin’y installed and it can handle up to 1 meg/sec download. But of course, no good PC without good software, but you know, good software is very expensive and on a beautifull sunday mornin’ you see somethin’ called Warez. Behold our kin’dom and you start drewlin’ a bit untill ur mom comes ragin’ in your room askin’ for you to put de garbage out. After helpin’ your mom out, de PC and fast internet connection is all yours. And so is de free software.

0×02.0 - packaged files.

As you might know, dese software packages are sometimes pretty big in size. To try and reduce de big-file-downloads, de releasers of de package will often use some techniques to reduce de load. Techniques as compressin’, archivin’ and splittin’. Read-on if you dont understand dese words.

0×02.1 - formats & tools.

If you’ve been around more than 1 year on de net, you prolly allready know all this but for de knew people I added this anyways.The basic use of your Windows Operatin’ System is de use of many different files and file-types. One of de most used file-types on de net is ZIP. File-types are also called ‘formats’.

An overview:

ZIP A zipped file is a file thats been archived and compressed.
RAR RAR files are commonly used for archivin’ files; which is puttin’ a large number of files in one file. Compressin’ is optional. File-splittin’ is optional.
ACE About de same as a RAR file, just an oder format and anoder application.

I explain this to you because dese file-types and corespondin’ programs are often, you can even use always here, used when you want to download Warez. The programs you download are almost always archived, compressed or bundled in one of de above formats. Keep readin’ if you didnt knew this

Ok so, now we know de formats of de files were gonna deal with, now de programs. As you have probably figured out allready, dese files arent created by Windows or by hand. Theyre made usin’ specialy designed applications. Ill show you what applications you can use.

WinRAR : My personal favorite. Handles all of de above stated formats and alot, alot more. If you ask for my opinion, I think this is de only program you’ll ever need.

WinZIP : This is a specially designed application for handlein’ ZIPPED files. If you like this one, take it.

WinACE : Anoder multi-file handlin’ tool. Personal opinion: good for splittin’ files, way too big for every-day use for decompression.

I’d say: make your choice. I recommend WinRAR because of it’s simplicity and effectiveness. But hey, I’m not forcin’ you. Just read some info on de sites and make ur choice.

Oh yeah, one last thin’: you’ll notice dese are all Evaluation versions. I suggest you crack them. Look for a good crack for de right version on: www.cracks.am.

0×02.2 - multi-part archives.

These files are archived in multiple parts (with one of de applicatiosn mentioned above). Which means de software was zipped or rarred and divided into files of a smaller size den de whole thin’ togeder. How do you handle this?

Download all de files to one directory.

Check if all files are dere. You can do this by lookin’ at de extensions: *.00, *.01, … If one’s missin’, download de missin’ file again (dere are more sofisticated ways to do this but this is de simplest).

Check if de files are about de same size. For example: de *.04 file must be de same size as de *.05 file, unless de 5th file is de last one.

If deres a file with de extension *.RAR, double click it and u can start unpackin’ de stuff.

If deres no *.RAR, but an *.ACE, do de same, its just an oder format.

Once you unarchived de package, you should have a directory full of files from an instalation or program. But its also possible dere are, with de archived files, some oder thin’s:

• If de software pack is a Warez Group (MYTH, CLASS, Fairlight (FLT), …) release, check if dere’s an EXE file with de package called Install.exe. If it’s dere, you can use that to unpack de files.
• If dere’s no exe in de package, de files are probably just ready to be copied to your directory of choice or ready to be installed.

IMPORTANT : please dont forget to read de NFO file. Its very important. It usually contains all furder information needed for you to successfully install de software. You can open it with NFO-file viewers or in Notepad (set font to: terminal, 6 or 9 pts).

Normally, you’re all done now and ready to start usin’ de software.

Ok, do I hear protest? Yes I do. It goes: “Hell, I downloaded a multi-part package but it has NO RAR OR ACE OR ZIP OR ANYTHING!!!! Just files with extensions called *.001; *.002, …”

You’re right. Although de situation is quite different from de situation above, it’s really not so different when you look closer. Those files are just unarchived de same way:

• Select de first file (*.001).
• Right-click it and select ‘Extract here…’

Watch de progress bar go! You see, its just de same method. You might notice deres only 2 or 3 files decompressed: ISO or CUE and BIN files. Thats fairly normal. Well talk about handlin’ them in topic 0×03.0.

0×02.3 - one-file downloads.

Ok so de stuff u downloaded was none of above. Conclusion: you downloaded one big file. This happens quite often when you download thin’s from fast-workin’ FTPs.

What you need to do now:

• If de file is archived (.rar, .ace, .zip, …), just unarchive it.
• If de file u unrachived is some weird *.ISO or *.CUE file, go to 0×03.0.
• If not, just continue de procedure as stated in 0×02.2.

0×03.0 - a clear view on images.

So when youre readin’ this, u probably have some files called *.ISO or *.CUE. Offcourse you want to install de software as fast as possible. But, deres a little problem here. Those extensions… What de hell are dey? Alienized files? No. Secret CIA files? Nope. You can stop guessin’. Ill tell you: those files are image files.

0×03.1 - what are images?

Image files are big files filled with data. Yea, you can say its a sort of archived file. But deres somethin’ special about them: dey are meant to written on a disc. They were made by special programs so dey could be used to write on a CD-R with a writer and specially designed software.

0×03.2 - ISO files.

ISO is de most used image-format on de net. It has become a standard to any commercial cd-writin’ software to support image-writin’ capabilities, more specific ISO images.

Conclusion: ISO is just an extension for a specific type of image -file. But how do you install your software? You have 2 ways of dealin’ with this:

1) Use de file for what is was created: writin’ it to a CD-R.
2) Extractin’ de contents of an ISO to a certain directory.

First: how to write them to a CD-R…

• Download some CD-R writin’ software (if you dont have it allready).
• Install and crack it.

I recommend Nero Burnin’ Rom. You can download it from WareZone in de Apps section.

• Go buy some CD-R’s
• Fire-up Nero and you can start burnin’. Im not goin’ to explain you how to use Nero. Read de help file about image writin’ and you should be fine. You can also use de wizard which is loaded automatically when you boot Nero.

Second: what to do if you dont got a CD-writer.

• Download some Image handlin’ software.

I recommend WinISO.

• Fire-up WinISO, load your image file and extract it. Again I wont explain how to use WinISO. Check for help files or tutorials on de net, dey should give you all de answers you need.

0×03.3 - CUE & BIN files.

CUE and BIN files always come togeder. The BIN file is comparable with an ISO and de CUE file is just a check, but it is required for any program to write this file correctly. Sometimes, deres an SFV file included. Again this is just a check-up about de file integrity. You can burn and extract dese files de same way i explained in 0×03.2.

0×04.0 - CD Emulation.

Ok, so here’s anoder way to handle ISO images if you don’t have a cd-writer. You can create a virtual cd drive. What’s that? That’s somethin’ you’ll see as a new disk drive in your Windows Explorer. This disk drive represents de contents you would see if you would burn de ISO image to cd!

How to create a virtual cd drive? Download DaemonTools !

Additional help on www.daemon-tools.com

Digital FAQ Website

www.digitalfaq.com/

Some of de topics covered

Capture:

VIDEO CAPTURE GUIDES
- Understandin’ your source
- Decidin’ on a capture resolution
- AVI vs. MPEG capture
- Interlaced vs. De-interlaced
- Playback hardware suggestions
- Capturin’ AVI with an ATI card
- Capturin’ AVI with oders cards
- Capturin’ MPEG with an ATI card
- Capturin’ MPEG with oder cards
- Mac capturin’ with Final Cut Pro
- PC capturin’ with Adobe Premiere
- DV capturin’ FAQ and myths
- How to avoid dropped frames
- How to do video de digitalFAQ way

Convert and Edit:

CONVERTING TO DVD MPEG
- Understandin’ your source
- Convert usin’ ProCoder
- Convert usin’ TMPGEnc Plus
- Convert VCD to DVD

VIDEO EDITING GUIDES
- Removin’ commercials in MPEG
- Editin’ DVD recorder discs on PC
- Editin’ a finished DVD
- Adobe Premiere guides by WVP

Restore:

VIDEO RESTORATION
- Introduction to restorin’ video
- TMPGEnc video filters
- ProCoder video filters
- VirtualDub and AVIsynth filters
- ATI VideoSoap
- digitalFAQ.com restoration services

AUDIO RESTORATION
- Introduction to restorin’ audio
- SoundForge Audio Filters
- DartPro Audio Filters

Author and Burn:

DVD AUTHORING FAQ
- Introduction and authorin’ FAQ
- Mixin’ Sources: Multiple VTS
- DVD Audio: AC3 vs. PCM vs. MP2

DVD AUTHORING & BURNING
- Author DVD: Sonic DVDit!
- Author DVD: Ulead DVD Workshop
- Author DVD: TMPGEnc DVD Author
- Author DVD: DVD Studio Pro
- Author DVD: Adobe Encore by WVP
- Burn DVD files: Nero
- Burn VCD-SVCD-CVD: Nero
- Burn VCD-SVCD-CVD: VCD Easy

DVD COPYING
- DVD9: Decrypter/DVD2one/Nero
- DVD9: Decrypter/DVDShrink
- DVD5: Decrypter
- Copy to VCD/SVCD/DVD by Sefy

Oder Video Info:

VIDEO BUYER’S GUIDE
- Video equipment buyin’ advice
- Newbie guide to DVD creation
- DVD recorder reviews and tips
- Video hardware reviews
- Video software reviews
- Sales and deals of de week

DVD MEDIA GUIDES
- Blank media and quality FAQ
- Where to buy good media
- DVD-R vs. DVD+R vs. DVD-RAM

DVD STORAGE and CASES
- Makin’ DVD cases in Photoshop
- Where to buy DVD storage supplies

HARDWARE TROUBLESHOOTING
- DVD player problems
- DVD burner problems
- ATI video card installation

Slipstreamin’ Windows XP Service Pack 1a and Create Bootable CD

Slipstreamin’ a Service Pack, is de process to integrate de Service Pack into de installation so that with every new installation de Operatin’ System and Service Pack are installed at de same time.

Slipstreamin’ is usually done on network shares on corporate systems. But with de advent of CD burners, it does actually make some sense for de home user or small business user to do de same.

Microsoft added de ability to Slipstream a Service Pack to Windows 2000 and Windows XP. It not only has de advantage that when you (re)install your OS, you don’t have to apply de Service Pack later, also if you update any Windows component later, you’ll be sure that you get de correct installation files if Windows needs any.

Slipstream Windows XP Service Pack 1a:
CODE
download.microsoft.com/download/5/4/f/54f8bcf8-bb4d-4613-8ee7-db69d01735ed/xpsp1a_en_x86.exe

Download de (full) “Network Install” of de Service Pack (En’lish version [125 MB]), and save it to a directory (folder) on your hard drive (in my case D:XP-SP1). Oder lan’uages can be downloaded from de Windows XP Web site.

Microsoft recently released Windows XP SP1a. The only difference is that this Service Pack does no longer include Microsoft’s dated Java version. If you have already installed Windows XP SP1, dere is no reason to install SP1a, but de “older” SP1 (with MS Java) is no longer available for download.

Next copy your Windows XP CD to your hard drive. Just create a folder (I used XP-CD), and copy all de contents of your Windows XP CD in that folder.

Now create a folder to hold de Service Pack 1a (SP1a) files you are about to extract. I named it XP-SP1. Next, open a Command Prompt (Start > Run > cmd), and go to de folder where you downloaded SP1a (cd foldername). Type de command: servicepack filename -x. A small window will appear, and you need to point it to de folder where you want to extract de SP1 files. Click Ok to start extractin’ de SP1a files.

Once de SP1a files are extracted, change to de update folder of de SP1a files (cd update), and type de followin’ command: update /s:path to WinXP CD files. In my example de command is update /s:D:XP-CD).

Windows XP Update will do its thin’:

When ready, you should get a confirmation. Windows XP Service Pack 1a has now been Slipstreamed into your original Windows XP files.

It is also possible to add de Windows XP Rollup 1 Update. For instructions, please read Addin’ Windows XP Rollup 1 Hotfix.

Creatin’ a Bootable CD

For this part I used ISO Buster
CODE
www.smart-projects.net/isobuster/
and Nero Burnin’.

Start to extract de boot loader from de original Windows XP CD. Usin’ ISO Buster, select de “folder” Bootable CD, and right-click Microsoft Corporation.img. From de menu choose Extract Microsoft Corporation.img, and extract it to de folder on your hard drive where you have your Windows XP files (D:XP-CD in my case).

Next, start Nero Burnin’ ROM, and choose CD-ROM (Boot) in de New Compilation window. On de Boot tab, select Image file under Source of boot image data, and browse to de location of de Microsoft Corporation.img file. Also enable Expert Settin’s, choosin’ No Emulation, and chan’in’ de Number of loaded sectors to 4 (oderwise it won’t boot!)

If you have an older version of Nero you won’t have de option Do Not Add “;1″ ISO file version extention under Relax ISO Restrictions. You won’t be able to boot your new CD, so update Nero!
You can configure de Label tab to your likin’, I would however recommend that you keep de Volume Label de same as on your original Windows XP CD.

Next press New, and drag & drop de files and folders from your Windows XP hard drive location into Nero.

Next, burn your new CD.

You now have a Bootable, Slipstreamed Windows XP Service Pack 1a CD!

How to create a bootable Windows XP SP1 CD (Nero):

Step 1

Create 3 folders - C:WINXPSP1, C:SP1106 and C:XPBOOT

Step 2

Copy de entire Windows XP CD into folder C:WINXPSP1

Step 3

You will have to download de SP1 Update, which is 133MB.
Rename de Service Pack file to XP-SP1.EXE
Extract de Service Pack from de Run Dialog usin’ de command:
C:XP-SP1.EXE -U -X:C:SP1106

Step 4

Open Start/Run… and type de command:
C:SP1106updateupdate.exe -s:C:WINXPSP1

Click OK

Folder C:WINXPSP1 contains: Windows XP SP1

How to Create a Windows XP SP1 CD Bootable

Step 1

Download xpboot.zip
Code:
Code:
thro.port5.com/xpboot.zip

( no download manager !! )

Extract xpboot.zip file (xpboot.bin) in to de folder C:XPBOOT

Step 2

Start Nero - Burnin’ Rom.
Select File > New… from de menu.
1.) Select CD-ROM (Boot)
2.) Select Image file from Source of boot image data
3.) Set Kind of emulation: to No Emulation
4.) Set Load segment of sectors (hex!): to 07C0
5.) Set Number of loaded sectors: to 4
6.) Press de Browse… button

Step 3

Select All Files (*.*) from File of type:
Locate boot.bin in de folder C:XPBOOT

Step 4

Click ISO tab
Set File-/Directory len’th to ISO Level 1 (Max. of 11 = 8 + 3 chars)
Set Format to Mode 1
Set Character Set to ISO 9660
Check all Relax ISO Restrictions

Step 5

Click Label Tab
Select ISO9660 from de drop down box.
Enter de Volume Label as WB2PFRE_EN
Enter de System Identifier as WB2PFRE_EN
Enter de Volume Set as WB2PFRE_EN
Enter de Publisher as MICROSOFT CORPORATION
Enter de Data Preparer as MICROSOFT CORPORATION
Enter de Application as WB2PFRE_EN

* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN
* For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN

Step 6

Click Burn tab
Check Write
Check Finalize CD (No furder writin’ possible!)
Set Write Method to Disk-At-Once

Press New button

Step 7

Locate de folder C:WINXPSP1
Select everythin’ in de folder and drag it to de ISO compilation panel.
Click de Write CD Dialog button.

Press Write

You’re done.