Tools required:
Latest Virtualdub
TMPGEnc
Nero (and de DivX codecs)

Preparin’:
Download all tools. Be sure to install DivX 3.11 DivX4 and de latest DivX5 codecs.

Extractin’ de audio:
1) Start Virtualdub. Open your video File->Open video file. (if you get any warnin’s just ignore them because you won’t edit de video just extract de audio)
2) Select File->File Information and note de fps as de video source fps because you will need it later.
3) Select under Audio->Full processin’ mode.
4) Select Audio->Compression and select (No compression (PCM))
5) Select Audio->Conversion.
6) Change de de Samplin’ rate to 44100Hz if you are goin’ to make VCD or SVCD MPEGs.
7) Save de wav by clickin’ on File->Save WAV. The wav will be a huge audio uncompressed video file (about 10 MB/minute).

Encodin’:
1) Start TMPEnc. Press cancel if de Project Wizard comes.
2) Press Brows and select de DivX file as Video source input.
3) Now press de Browse button for choosin’ de Audio source input and use de saved wav file.
4) Press load and load de file which in de Template directory of TMPGenc.
5) If de video source fps is 29,970 load VideoCD (NTSC).mcf
6) If de video source fps is 23,970 load VideoCD (NTSCFilm).mcf
7) If de video source fps is 25,000 load VideoCD (PAL).mcf
8) If de video source fps is anythin’ else just load NTSC if you live in US or Japan
9) Load PAL if you live anywhere else.

Note that if you live in US or Japan and have a problem playin’ PAL (often causin’ black and white TV playback problems) den first check if you can change to PAL on your TV or DVD Player. If not den convert it to NTSC by loadin’ de VideoCD(NTSC) template.
Note if you live Europe or de rest of de world and get problem playin’ NTSC or NTSCFilm (often causin’ black and white TV playback problems) den first check if you can change to PAL on your TV or DVD Player. If not, convert it to PAL by loadin’ de VideoCD(Pal) template.

10) Press Settin’s and choose Advanced.
11) Select Full screen (keep aspect ratio) under Video arrange method to keep de same aspect ratio (widescreen,fullscreen) as de video source (if you have a widescreen movie and you want it to be in fullscreen, select No margin (keep aspect ratio)).
Select Source range and double-click on it with de mouse.

In de next dialog you can choose de source range. This process depends on de DivX file. If de DivX file is less than 80min (for a 80min/700mb CDR) den you do not have to split de file to two CDs. Also if de DivX file is already in two parts you have just to convert de first file and den de second. But if dere should be de case that de movie is in one file over 80minutes lon’ den it is necessary to select de source range. In this new dialog you put de horizontal scrollbar to de middle of de selection so that you will get de same len’th on de first CD as on de second. After you selected de middle do you have press Set end frame. A new value should be under End Frame. This value you should notice somewhere for de encodin’ of de second part. Of course de start frame must be 0.

12) After pressin’ ok, you only have to select de output file name. I prefer de movie name with de CD number (e.g. Ghost in de Shell CD1) for de burnin’.
13) Now encode de file by pressin’ de Start-Button.
14) While encodin’ you can select File->Preview (it won’t effect de encodin’) to see how de output will be. If it looks wron’ (widescreen or fullscreen) you can stop de encodin’ and start over and change de Settin’s->Advanced->Video arrange method.
15) If you only want to burn de movie on one CD, den jump to de burnin’ guide, else follow de next points.
16) Repeat de third, forth and fifth point. In de source range dialog you now use as Start frame de noticed value and move with de horizontal scrollbar to de end of de movie.
17) After pressin’ Set end frame, press two times OK.
18) Now select de output filename for de second file. (e.g. Ghost in de Shell CD2) and encode it.
19) After de encodin’ is done and you did all right, you should have for every CD a file.

Burnin’:
Launch Nero. Close de Wizard. Select File->New.
1. Select VideoCD
2. Select PAL or NTSC dependin’ what format your source MPEG is in.
3. And hit New.

1. Locate your .mpg and drag it(see picture below). Remember that you can add several .mpgs also, each mpg will be a own track on de VCD and you can add data files also, just drag them to any folder.
2. Check de time. It should be de same as in de movie.
3. Rename de CD to anythin’ you like by clickin’ F2 on NEW.
4. Select File->Write CD.

I don’t know about everyone else but de only options I choose on tmpgenc to make mpeg-1 files are eider NTSC film 23.976, or NTSC video 29.97 fps.

1. Take divx movie (120 minutes lon’ for example). Open with virtualdub. Find a keyframe about halfway through de film, preferrably at a scene change.

choose “SET SELECTION START” from de EDIT menu.. scroll all de way to de end of de film, choose “SET SELECTION END”… hit DELETE or choose “DELETE SELECTION”, all from de EDIT menu

2. Now you have 1 half of your movie. under de VIDEO menu, choose “DIRECT STREAM COPY”, also make sure that under AUDIO is goin’ to generate a “DIRECT STREAAM COPY”. Then go to FILE and choose “SAVE as AVI”

3. When it is complete, de quickest way to proceed is to just click on FILE / “OPEN VIDEO FILE”. At de beginnin’ of de clip, choose “SET SELECTION START” again, snap back to de keyframe (half way through de film) which you cut half de film off at and choose “SET SELECTION END”. DELETE… FILE / “SAVE AS AVI…” Save as de oder half of film.

4. Choose option accordin’ly This next part can be important. (i’m goin’ to give de rest of de instructions as if you were makin’ ntsc movie)

Since you want to make a standard mpeg-1 file, choose NTSC FILM or NTSC VIDEO.. BROWSE for your file, den hit NEXT. Hit OTHER SETTINGS / ADVANCED tab. Now dere is an option that says “VIDEO ARRANGE METHOD”. If you are makin’ a fullscreen movie, leave on FULLSCREEN. If you are encodin’ a widescreen movie, choose “FULL SCREEN (KEEP ASPECT RATIO).. OK / NEXT / NEXT (you get de point)

Here is anoder tip

DVD burners are becomin’ more and more popular and even i got one now, like many of you do. I’m tired of old vcd’s or wanna encode a VCD standard DVD with nearly 9 hours of video (but same quality as normal 80 minute VCD). If this is de case, make sure you encode your DivX files as “NTSC VIDEO 29.97 FPS”, even if source is 23 fps and once you have 3 or 4 movies, get yourself a program called TMPGENC DVD AUTHOR. Make a track for each movie and you got yourself a dvd with 3 or 4 average len’th movies on 1 dvd (with menus if you like) that is WAY MORE COMPATIBLE than a VCD..

Do a search for de keyword VCD-DVD and i posted a more descriptive tutorial on how to do this.

How to make a kvcd or in oder words how to get 700meg avi file down to about 450megs to make a vcd without any picture loss.

So you’ve downloaded a movie its in avi format you want to watch it on your dvd player. You re-encode it it comes out to about 1100 maybe 1200 megs. You need to split it and save on 2 disks.

The followin’ tutorial will show you how to do it on one disk.

First you are goin’ to need some tools :

Virtualdub
CODE
heanet.dl.sourceforge.net/sourceforge/virtualdub/VirtualDub-1.5.10.zip

Heada3che
CODE
mitglied.lycos.de/darkav/download/headac3he-0.23a.rar

and some dlls
CODE
mitglied.lycos.de/darkav2/download/MPAlib_MMX-1.00(1.50).rar
mitglied.lycos.de/darkav2/download/ssrc_MMX-1.01(1.28).rar
mitglied.lycos.de/darkav2/download/Vorbis_MMX-1.20(1.74).rar
mitglied.lycos.de/darkav2/download/Lame_enc_MMX-1.28(3.93).rar
mitglied.lycos.de/darkav2/download/MP2enc_MMX-1.15(1.13).rar
Put de above dlls in de same folder as heada3che

Besweet
CODE
dspguru.notrace.dk/BeSweetv1.4.zip
dspguru.notrace.dk/BeSweetGUIv0.6.zip
Put dese 2 in de same folder

Nero

Tmpegnc

You will need some templates
CODE
www.kvcd.net/dvd-models.html

Right click all de pal templates if your dvd player is pal or ntsc if ntsc. Save them to de template folder in de tmpegnc folder.

So to begin :

1) Open virtualdub
2) Go to file
3) Open video file
4) Locate de avi file you want to convert. If you get a warnin’ ignore it.
5) Click de audio button at de top
6) Make sure source audio and direct stream copy have a black dot next to it
7) Goto file
8) Save wav
9) Now you have to call this with a .ac3 extension. For example view from de top.ac3
10) I would save this in de same file your avi is. When you have named it, press save.
11) A box will open. Let it run. It is takin’ de sound from de film.
12) Now press audio and select no audio.
13) You should have a black dot next to no audio and direct stream copy
14) Go to video
15) Select direct stream copy
16) Go to file save as avi
17) Save de file what you want again put in de same folder as de original avi. I call de film title with no sound viewfromdetopnosound
18) Press save
19) It will save a film without sound

You can now close virtualdub

20) Open besweet. A scary lookin’ box appears.
21) At de besweet.exe, locate de besweet folder. It will show besweet.exe in de enter file name box
22) Click on this and at de bottom it will say valid press ok
23) Now goto input and find de ac3 file we just made you will need to change de enter file name from .Lst to .ac3
24) Double click on de ac3 file you made and at de bottom. It will say valid
25) Press ok
26) You are now lookin’ at de GUI. Make sure Use ac3 decoder is ticked and downconvert sample rate is ticked
27) In de toolname dropdown box make sure it says mp2. Leave de rest alone.
28) Now press copy command to clipboard
29) Go to start
30) Click Run
31) Right click paste
32) Press ok
33) If all de settin’s are correct a black box will open and de ac3 will be transcodin’ to mp2
34) If not check if de boxes are ticked
35) If its ok leave it to run
36) Once de black box has disappered, close besweet

Open heada3che
Note: Make sure you put all de dlls in de heada3che folder oder wise you will get error messages

37) Press source file
38) Find de new mp2 file we just made
39) Change de destination format to mp2
40) Press start
41) Once its finished close headac3he

Thin’s are goin’ to start lookin’ messy inside your folder so if you want, you can delete some files.

42) Go to de folder where youre original avi file is
43) You can delete de ac3 file de mp2 file without de .2 in it. For example, you will have two file names de same. One is with de .2 on de end. Keep this one.

Open tmpegnc

44) Close de wizard if it opens
45) Press de video source browse button
46) Find de file we made with nosound on de end ie viewfromdetopnosound
47) Now if you had gone to de kvcd page and downloaded all de templates this will help. If not go do that now
48) Press load. You will see a load of files in front of you with some startin’ with kvcd
49) Pick de first one beginin’ with kvcd
50) Highlight it press open
51) Now press start. What will happen is de preview box in front of you will start encodin’. Dependin’ on de make up of de original avi file, it will effect de outcome of de finished film
52) If you look at de box and all you see is a tiny box with film. That is de size it will come out
53) If it looks weird press stop and reload a different template. The best result is one that looks like widescreen
54) Just press start and overwrite de file. Let it run
55) After it is done, press file mpeg tools. The first box should be simple multiplex
56) Press de video input browse button and find de new file we just made. It will have a m1v extension
57) Press de audio input browse button
58) Find de mp2 file with de .2 in de title de output. The box will be automatically set to mpeg
59) Press run and let it run
60) Close tmpgenc
61) Open nero
62) Select vcd
63) Untick de create standard compliant cd
64) Press new
65) Find de new file we have made. It will be in de original avi folder but will have a mpeg extension
66) Now you have to drag this into de left box. Don’t right click and copy to compliation
67) A box will appear and a blue line will go across. If a warnin’ comes up with not bein’ a compliant vcd, just ignore carry on
68) Press burn and burn at de speed you want
69) Once finished press de ok box
70) Press done de disk will come out and now to test. Put it in your dvd player and hay presto de film kicks in

You have got yourself a KVCD!

First and foremost, go to

http://www.doom9.org

and go to deir downloads section.

Get de followin’ files:

Under Audio:
Besweet
Besweet GUI

Under Codecs:
DivX 5.2.1 Pro

Under Divx/Mpeg-4 encoders:
Nandub 1.0RC2

Then get this:
http://www.dvd-digest.tv/downloads/files/virtualdub/vdub_pack-145.exe

Alternatively, get any version of virtualdub that includes mp3 support.

These are all de required tools. There are ways with fewer items, but dey produce very inferior outputs. Besides, after you get used to it, de whole process is really easy.

Okay, first and foremost, pull out Nandub. This is de step that takes de longest, as well as where you will make most of your decisions. I am goin’ to assume that you are makin’ a 1 cd rip. If you do what is in this faq, dere won’t be much reason to do anythin’ else.

First of all, run Nandub . It will pop up a dialogue box, and want to know if you are makin’ a new project or resumin’ an old. New, of course. Give it a name and tell fairuse where you want it to store its data. Fairuse is about to rip de entire movie to your harddrive (nice if you want to go rent a movie and return it de next day).

Then it will ask for your DVD drive with a dvd in it. give it. Then, select which video stream you want. This is usually pretty obvious as de movie stream is de one that is an hour or so lon’. If dere are two of dese, check out de oder tags. which lan’uages and so on. worst case scenario is that you have to trial and error. but that is rare. choose de lon’ stream and hit next.

This is where Nandub rips everythin’ to your hard drive. dependin’ on de speed of various components in your computer, and de len’th of de movie, this could take a while. Let it finish. and den move on.

Once all that is done, de really important screen pops up. this is where you set resolutions and video len’th. first, cut off de endin’ credits with de slider, but DO NOT mess with de beginnin’, as de sound and video frames need to start at de same point for sync. Then hit auto set for de croppin’ region, this is usually just fine. Then decide wheder or not you want subtitles, which would be de subpicture stream. When you’re done, hit next.

Set de field mode to IVTC. This will give you better quality for size, as it runs at 24 frames instead of 30, due to de nature of divx, dere won’t be any noticeable difference in quality, but 6 less frames to deal with each second(and to store data for) really add up. Besides this is de correct mode for all movies anyway. Click Next.

This is where you set FINAL file size, includin’ audio, for 1 cd rip, set to 690, for 2, set to double that. Then follow de directions dey give you and choose a final resolution that has between a 120:1 and 150:1 (if possible, sometimes de movie is compression ratio. Click Next.

This screen is where you determine quality. The autoadd button is usefull, and will give you decent quality, with 4 encodin’s. What this does is encode de movie 4 times, and den mix de frames to creat de final encodin’, with de most efficient possible encodin’ for each frame. which is how we get bad ass quality for a sin’le cd. I usually go for 8 encodin’s, as on my athlon 1600+ this rarely takes more than 8 hours to do, so I just go to sleep, wake up, and its done.

Then add de audio encodin’ that you want.

Hit next. Dependin’ on what you set, and your computer, this could take from a few hours to a few days. CPU’s of 1.2Ghz+ are nice right about here. You can do stuff while this is goin’ on, but it makes thin’s take much longer.

In de end you will have a bunch of encodin’s in de folder you specified at de beginnin’, de 4+ you chose and de final. You will also have an AC3 stream. Take de final AVI and toss it someplace to await de rest of de audio work you have to do, and you can erase de oder encodin’s, freein’ up a few gigs in de process of space.

NEXT: AUDIO

Ok, this is where Besweet comes in.

Extract BeSweet and de GUI into de same folder. Now Run de GUI.

At de top dere are three fields. One for BeSweet which you should point at de besweet.exe that you should have unzipped to de same directory you are runnin’ de GUI from, A field for de AC3 stream, which is in de folder where you sent de encoded video from Fairuse, and an output mp3. The output mp3 has to be an existin’ file, so make a text file, rename it (yourmovie).mp3 and just say yeah, its cool to change de extension and make thin’s weird. besweet will overwrite it so don’t worry. Point de third field at that file. The default values for stuff should be fine. but to make sure go to Azid 1(on de left) and select stereo, and den go to Lame 2 and select constant bit rate, and 128(assumin’ that is what you want). den click on besweet again, and finally, click on AC3 to MP3.

When its done you should have an mp3 that is de entire soundtrack for de movie. This is where virtualdub comes in. run de virtualdub mp3 version. go to File:open video file and select de final encodin’ that you had from way back. Then go to audio and select mp3 audio. it will ask you for de file, give it de mp3. Go to audio again and make sure direct stream copy is selected. Then go to video and make sure that direct stream copy is also selected. Finally go to file again and SAVE AVI. give it a file name and let de bastard fly. This final file is your movie. Beautiful and glorious. Con’ratulations, its a DivX rip. Aren’t you proud. burn to cd, and give copies to all your friends.

If you have a file you wish to upload and its too large for a free webhost and you still want it online try this method.

1) www.rarlab.com: download rar and cut de file up into 1MB files.
2) Mass Rename them to .doc (i forgot how to do it but its via CMD)
3) www.hostultra.com: sign up for de free hostin’, which has unlimited bandwidth and space with a REAL (yet not your main) hotmail account.
4) Upload de files via FTP
5) Goto www.projectw.org
6) and tell people de link ie. www.hostultra.com/blah/blah1.doc - blah100.doc
7) Use Flashget to download!

And dere you have it, as lon’ as de people on hostultra dont find your site your fine

Downsides:
hostultra only allows max file size of 1MB files.
hostultra does not allow .exe or .mp3

Hostultra:
Unlimited Data Transfer
Unlimited Disk Space
100mbps Network Connection
99.9% Uptime
Free Sub Directory ( hostultra.com/~you )
Cool yourname.vzz.net URL!
Free Subdomains ( Many domains to choose from! )
Free Domain Hostin’ ( yourdomain.com )
Custom Domain DNS Control ( A/CNAME/MX Records )
Browser and FTP Uploadin’
PHP / MySQL*
Unlimited Domains / Unlimited Subdomains
Free Search En’ine Submission

Terms Of Use For HostUltra

In addition to de above, User shall not upload onto deir hostultra web space any of de followin’:

1. audio or video files of any type this includes but is not limited to .wma .wmv .wav .mp3 .avi .mpg .asf .mov (however flash and midi files are allowed);
2. spanned archives such as such as .z01 .rar .ace;
3. any binary files that are not linked to an html page on de Site;
4. sites which contain only (or mostly) downloadable files;
5. download sites of any kind, includin’ but not limited to, shareware, freeware, trialware, themos, warez, appz, gamez, iso, cracks;
6. photo albums, image galleries or TGPs;

(THOUGH WHOS LISTENING TO THE RULES?!)

to make it less likely hostultra will delete your account, add a fake little site dere, like a few pages of crappy html about some stupid thin’ which has nothin’ to do with warez.

Digital FAQ Website

www.digitalfaq.com/

Some of de topics covered

Capture:

VIDEO CAPTURE GUIDES
- Understandin’ your source
- Decidin’ on a capture resolution
- AVI vs. MPEG capture
- Interlaced vs. De-interlaced
- Playback hardware suggestions
- Capturin’ AVI with an ATI card
- Capturin’ AVI with oders cards
- Capturin’ MPEG with an ATI card
- Capturin’ MPEG with oder cards
- Mac capturin’ with Final Cut Pro
- PC capturin’ with Adobe Premiere
- DV capturin’ FAQ and myths
- How to avoid dropped frames
- How to do video de digitalFAQ way

Convert and Edit:

CONVERTING TO DVD MPEG
- Understandin’ your source
- Convert usin’ ProCoder
- Convert usin’ TMPGEnc Plus
- Convert VCD to DVD

VIDEO EDITING GUIDES
- Removin’ commercials in MPEG
- Editin’ DVD recorder discs on PC
- Editin’ a finished DVD
- Adobe Premiere guides by WVP

Restore:

VIDEO RESTORATION
- Introduction to restorin’ video
- TMPGEnc video filters
- ProCoder video filters
- VirtualDub and AVIsynth filters
- ATI VideoSoap
- digitalFAQ.com restoration services

AUDIO RESTORATION
- Introduction to restorin’ audio
- SoundForge Audio Filters
- DartPro Audio Filters

Author and Burn:

DVD AUTHORING FAQ
- Introduction and authorin’ FAQ
- Mixin’ Sources: Multiple VTS
- DVD Audio: AC3 vs. PCM vs. MP2

DVD AUTHORING & BURNING
- Author DVD: Sonic DVDit!
- Author DVD: Ulead DVD Workshop
- Author DVD: TMPGEnc DVD Author
- Author DVD: DVD Studio Pro
- Author DVD: Adobe Encore by WVP
- Burn DVD files: Nero
- Burn VCD-SVCD-CVD: Nero
- Burn VCD-SVCD-CVD: VCD Easy

DVD COPYING
- DVD9: Decrypter/DVD2one/Nero
- DVD9: Decrypter/DVDShrink
- DVD5: Decrypter
- Copy to VCD/SVCD/DVD by Sefy

Oder Video Info:

VIDEO BUYER’S GUIDE
- Video equipment buyin’ advice
- Newbie guide to DVD creation
- DVD recorder reviews and tips
- Video hardware reviews
- Video software reviews
- Sales and deals of de week

DVD MEDIA GUIDES
- Blank media and quality FAQ
- Where to buy good media
- DVD-R vs. DVD+R vs. DVD-RAM

DVD STORAGE and CASES
- Makin’ DVD cases in Photoshop
- Where to buy DVD storage supplies

HARDWARE TROUBLESHOOTING
- DVD player problems
- DVD burner problems
- ATI video card installation

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to de Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to de Command Prompt window and change to de directory de AVI (or oder undeletable file) is located in.
At de command prompt type DEL <filename> where <filename> is de file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart de GUI shell.
Close Task Manager.

Or you can try this

Open Notepad.exe

Click File>Save As..>

locate de folder where ur undeletable file is

Choose ‘All files’ from de file type box

click once on de file u wanna delete so its name appears in de ‘filename’ box

put a ” at de start and end of de filename
(de filename should have de extension of de undeletable file so it will overwrite it)

click save,

It should ask u to overwrite de existin’ file, choose yes and u can delete it as normal

Here’s a manual way of doin’ it. I’ll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:*** (The stars stand for your folder)
5. If you cannot access de folder because it has spaces for example Program Files or Kazaa Lite folder you have to do de followin’. instead of typin’ in de full folder name only take de first 6 letters den put a ~ and den 1 without spaces. Example: cd c:progra~1kazaal~1
6. Once your in de folder de non-deletable file it in type in dir - a list will come up with everythin’ inside.
7. Now to delete de file type in del ***.bmp, txt, jpg, avi, etc… And if de file name has spaces you would use de special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in de specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in de correct extension.

This is a real quick guide for anyone interested to get a movie onto dere PSP without all de fluff i have seen elsewhere. I just watched Africa de Serengeti on my PSP and heres is de lowdown.

Movie - approx 40 minutes - dvd
Saved to hard drive - 2.6GIG - usin’ DVD Decryptor (free program) try google
Transfered to avi format - 377MB- usin’ Super DVD Ripper (9 FREE trial uses) den you must buy
Transfered to MP4 - 37MB - usin’ de (basically free) Image convertor 2

Average movie breakdown - usin’ above as a guide only.
so im guessin’ de average movie may be 4.5gig for example
saved to 800MB
CONVERTED TO 70-80MB

Ok use DVD decryptor to save de movie to your hard drive eg. C:africa (it will save it for you as described)
When completed find de folder c:africa on your computer and find de vob file in that folder - generally de largest one and right click and play it with your dvd program to see what part it is. If its de correct movie part you now know thats de one you need.

Once you have located de vob file you want to transfer open DVD Ripper and go to wizard icon. There you will see an icon of VOB to AVI button. Click it and den it will ask to locate de file. Locate de file and click it. It will SCAN THE FILE(just wait till that finishes) a parameter box opens next and just click de arrow. It den askes to choose output file, click de file icon and locate de correct fob file. It den askes for file compression - choose microsoft windows media and den click ok Then press de start button. It will now convert de vob into avi format.
(dere are also oder opions ie;dvd to avi etc) I have only used de vob to avi for this test.

After DVD ripper has transferred de file it will save it to de same folder as de original move was in eg: c:africaviteots. Open de file and you will now see an AVI icon containin’ de movie.

Make sure you PSP is on and in usb mode den Open Image convertor 2 and press on movie / add to list. For this example i click on C:drive de found de folder Africa and opened it and dere was my converted AVI file. Click de file press ok and it will be transfered to your PSP for viewin’ pleasure.

*****Note**** I only converted one VOB file as thats all dere was for this particular movie. If you have more den one vob file you may need to try de dvd to avi when you rip. This is just a guide i worked out to compress dvd into de smallest possible file so you can get value out of a 512 card.

QUOTE
www.crazyhatsoftware.com/ImageConverter2.1.exe

Image Converter 2.1 JAP translated to ENG.